Havis-Shields C-TCB-30 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non Havis-Shields C-TCB-30. Havis-Shields C-TCB-30 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
C-TCB-30-INST-9-05
INSTALL INSTRUCTIONS C-TCB-30
2000-2005 CHEVROLET IMPALA
TOOLS REQUIRED:
Ratcheting Wrench
Torx Bit Set
Standard Socket Set
Standard Wrench Set
Screwdriver Set
HARDWARE:
QTY DESCRIPTION PART #
7 ¼-20 x ¾” Hex Head Bolts GSM33001
7 ¼” Flat Washers GSM31005
7 ¼” Lock Washers GSM31026
1 5/16-18 x 1” Hex Head Bolt GSM33012
2 5/16” Flat Washers GSM31006
1 5/16-18 Nylock Nut GSM30017
MAIN COMPONENTS:
QTY DESCRIPTION
1 Main Seat Base Plate
1 Pole Support Assembly
1 Cross Brace
1 Telescoping Pole
SUB ASSEMBLY:
1. Remove Passenger Seat:
Remove (2) T-50 torx bolts on passenger seat base.
Disconnect wire plug if vehicle has power seats.
Remove head rest on passenger seat.
Angle seat forward and pull back to remove seat, which is held down in the front by
(2) hooks on the floor.
INSTALLATION:
1. Mount C-TCB-30:
Position Main Seat Base Plate so that square cutouts are positioned where hooks for
seat are located.
Replace passenger seat sliding hooks into the floor first.
Replace torx bolts (T-50).
Mount Pole Support Assembly to Main Seat Base Plate using ¼-20 x ¾” Hex Head
Bolts, Washers and Nuts.
Attach Cross Brace to Pole Support Assembly using Tab on side of pole and
5/16-18 x 1” Hex Head Bolt, Washers and Nuts.
Mount Cross Brace on passenger seat using existing hole.
Main Seat Base Plate
Pole Support
Assembly
Cross Brace
Telescopin
g
Pole
Vue de la page 0
1

Résumé du contenu

Page 1 - 2000-2005 CHEVROLET IMPALA

C-TCB-30-INST-9-05 INSTALL INSTRUCTIONS C-TCB-30 2000-2005 CHEVROLET IMPALA TOOLS REQUIRED: Ratcheting Wrench Torx Bit Set Standard Socket Set

Commentaires sur ces manuels

Pas de commentaire