Havis-shields 2004-2008 Ford Econoline Van C-VS-1800-ECO Manuel d'utilisateur télécharger pdf

C-VS-1800-ECO_INST_9-07

INSTALL INSTRUCTIONS C-VS-1800-ECO

2004-2008 FORD ECONOLINE VAN

TOOLS REQUIRED:

3/8” Standard Socket Set

3/8” Metric Socket Set

3/8” Ratcheting Wrench

Powered drill w/ drill bit set

Open-end wrench set

Screw driver set

HARDWARE & COMPONENTS:

QTY DESCRIPTION PART #

6 ¼-20 Nylock nut GSM30016

4 ¼” Flat washer GSM31005

2 ¼-20 x ¾” Carriage bolt GSM32000

4 ¼-20 x 1 ¼” Hex head bolt GSM33003

4 #10 x 1” Phillips sheet metal screw GSM33196

1 Torx Screw Hardware Kit C-HK-1

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

INSTALL C-VS-1800-ECO:

1. Remove O.E.M. engine cover accessory package (cup holder/storage pocket).

2. Place new console housing with mount brackets against engine cover and

floor. Mark engine cover and drill four (4) - 5/16” diameter holes. Mark

outline of floor bracket.

Also remove

washers from studs

1 2 3

C-VS-1800-ECO_INST_9-07 INSTALL INSTRUCTIONS C-VS-1800-ECO 2004-2008 FORD ECONOLINE VAN TOOLS REQUIRED: 3/8” Standard Socket Set 3/8” Metric Socket

C-VS-1800-ECO_INST_9-07 3. Remove mount brackets from console housing and attach to engine cover with ¼” x 1 ¼” hex head bolts, stop nuts and fender

Page 3

C-VS-1800-ECO_INST_9-07 6. Attach Console to Mount Brackets. 7. Finished Product

Pas de commentaire

Havis-shields 2004-2008 Ford Econoline Van C-VS-1800-ECO Manuel d'utilisateur